Hiretech offers Zone 1 and Zone 2 single stage centrifugal pumps delivering a range of flows and pressures up to 15 bar, which are typically used for pumping water, mud, brine and chemicals.
The pumps incorporate both a mechanical and soft gland packing seal arrangement for enhanced reliability and minimum leakage.
All units are containerised in DNV 2.7-1 certified housings and are CE Marked to the latest safety standards.
Flanges are standardised to ANSI and Fig 206 specifications, although other tie in connections can be provided as required.
Hiretech also offers a range of suction and discharge hoses compatible with the fluids to be pumped.
| Engine Type | Caterpillar C18 ACERT Tier lllb | ||
|---|---|---|---|
| Pump Type | SC108C18L71 HG Fluid End | ||
| Length x Weight x Height | 3800 x 1830 x 2450 mm | ||
| Gross Weight | 6,000 kgs | ||
| Max Flow | 1000 m3/Hr | ||
| Max Pressure | 14 bar | ||
| Certification | DNV 2.7-1 |
| Hydraulic Motor Supply | 225 lpm at 230 Bar | ||
|---|---|---|---|
| Pump Type | Mud Hog 4x3x13 Centrifugal | ||
| Length x Width x Height | 1700 x 1240 x 800 mm | ||
| Gross Weight | 1500 kg | ||
| Max Flow | 3000 lpm | ||
| Max Pressure | 9.3 bar | ||
| Certification | DNV 2.7-1, ATEX |
| Engine Type | Zone 2 Iveco 7675 Si | ||
|---|---|---|---|
| Pump Type | SPD Mud Hog 4x3x13 | ||
| Length x Width x Height | 2980 x 2420 x 2660 mm | ||
| Max Flow | 3.6 m3/min | ||
| Max Pressure | 9 bar | ||
| Gross Weight | 10,000 kg | ||
| Certification | Designed and tested to DNV 2.7-1. ATEX and CE Marked |
Return to ← Centrifugal Pumps
